Like any other household, mobile homes are also one of the most favorite places for mold to grow. The molds rely on two sources; moisture and food source. Any existent leakage provides necessary moisture for the mold to develop, and any organic surfaces like wood, paper, dirt, dust or latex carpet backing can amount to a food source. Using a commercial ozone generator for mold can prevent this problem. In case it is beyond prevention, let’s have a look at our guide on how to get rid of mold from your mobile home before it is too late.
Detect the Leakage: Firstly, you will have to look for any possible leakage in your house. The water flowing from the cracks creates a favorable environment for the molds to feed on. If you do not find the water source, your whole effort will go in vain as the molds will keep reappearing. Before proceeding, fix the leakage taking professional help, if needed.
Create a barrier: In the mold removal process, secondly, you need to identify the areas affected. You have to keep in mind that some moldy areas may be unseen. Do not forget to remove the drywall, carpet or wallpapers to get a clearer view. To prevent contamination, you must create a barrier to the affected area. Use plastic barriers to create a seal. This will stop the situation from getting worse.
Measure the contaminated area: To determine how much spray to use, you will have to measure the affected area. Bring out your measurement tape and measure the height and the width of the space you have already put the plastic barriers around. Here you will have to use some maths and multiply the height and width to get the square footage area.
Prepare the area to avoid spreading: To get the best results at home without using the ozone generators for molds, you need to arrange a negative air machine. Placing the device both inside and outside the moldy area works as a filtering machine. It is crucial that during the mold removal process, the spores get carried by air. As a result, you may get to see new mold appearing here and there. The machine will filter out the air and will omit out possibilities of any further contamination.
Fasten the process: Getting a dehumidifier and air mover is the next best possible thing to do. They will accelerate the airflow, which will help the negative air machine catch on the spores flying in the air. Additionally, this step will dry the structures quickly and fasten the whole process. Having an air purifier for mold with UV lights can do wonders as well. The UV lights are beneficial to destroy the airborne spores and stop them from going places to prevent it from spreading.
Don’t forget the safety measures: If you have already followed up on this step, it can be said that you are almost ready to bring out your spray. But before proceeding, you must take safety measures. Put your Tyvek suit, latex gloves, eye-protection goggles and N-95 mask on.
To make the spray at home: To make the best mold remover at home, you will need one cup of household bleach and one-fourth cup of liquid dishwashing soap. We suggest you avoid the one with ammonia in it. Mix the bleach and soap in water and give it a mix. Get the mixture into a clean spray bottle. Furthermore, wipe down the mold using a clean wiping cloth.
Additional options that you have: As someone who doesn’t like to go through the trouble of making the spray solution at home, you can always get one from your nearby hardware store. In that case, strongly follow the instructions given on the label of the product. Additionally, another great way to deal with the mold is to pick out the best ozone generator from the market that suits your budget and need. The same process is generally followed as a basement mold removal or to remove mold from stucco.
Disposal of the waste: When you are done with the cleaning, it is time for disposal. The mold contained materials and mildew has to be stored inside a plastic bag and sealed securely. Make sure not to puncture any hole in the bag. Use a high-efficiency particulate air vacuum cleaner to ensure the best cleaning. Wipe out the entire area with a cloth wet with an antimicrobial solution. Change the fabric in between the process if required. To be on the safe side, it is better to repeat the cleaning process once a day for three to four days.
Prevention is better than cure: By the time you are done with the mold’s cleaning, you must take steps to prevent the same problem from arriving in the future. To prevent the mold from getting into your mobile home, at first, have a regular inspection for any possible leakages. Additionally, excess moisture can be the cause of mold reappearing. Make sure to have constant airflow in our mobile home. Keep the windows wide open as much as you can.
Some gadgets that may help: Another thing to do is to get a humidity meter from a hardware store. This device detects the humidity level of your home. Why is it important? Because you must maintain a humidity level from 30 to 50 percent in your home to avoid mold. Temperature plays a vital role, as well. Try to use the heating system and keep the temperature as high as you can. The skirting in the base of your home can allow the moisture to get inside your mobile home. What you can do is to use a skirting vent to deal with the excessive humidity. We suggest you to avoid piling up damp or wet cloths in a place to give the mold a chance to grow. Lastly, a good whole house humidifier can prevent mold if the balanced level is used.
Mold inside your home can create an unhealthy surrounding for your family. To avoid the diseases like asthma, allergy, skin rashes, eczema from entering your home, the mold requires to be taken care of in the first insurance. A mold-free home creates a healthy environment for your kids to grow in and gives a fresher look. We hope our guide to how to get rid of mold from a mobile home was helpful for you.